You are here: HOME | Electronics | Repair Services | Fluke Scopemeter LCD

Fluke Scopemeter LCD Display Repair

So you have a Fluke 120 or 190 (or 215/225) Scopemeter, an expensive, high-quality precision instrument, but these annoying black, missing, or dark horizontal (or vertical, in some cases) lines have appeared on the display making it difficult or even impossible to read accurately. Worse than that, you discover that it will cost several hundred dollars to replace the LCD screen. And of course, your warranty expired yesterday!

Right-Click Computer & Electronics Service can help you save your hard-earned dollars by repairing your Scopemeter's screen and restoring those missing lines for a fraction of the cost of a new display. Birthed out of the necessity to repair our own equipment, we conceived a method that was so successful that we are now offering the service to the general public at an affordable flat-rate fee.

Fluke Scopemeter 123, 124, or 125 LCD display screen showing missing blank horizontal lines due to seperation of the ACF bonding layer.
Fixed Scopemeter 123, 124, or 125 LCD display screen showing repaired black, dark horizontal lines.
Before and after photos of an actual 123 Scopemeter repair job. The two vertical lines on the extreme right of the repaired display indicate internal damage to the LCD from rough use and can only be corrected by replacing the module, which is beyond the scope of this repair procedure.

If these images describe your situation, then Right-Click Computer & Electronics Service has the solution for you! To get started with your repair order, click the button below. When we receive your Scopemeter, we will verify the problem and repair it accordingly. If there is some other issue surrounding the "missing line syndrome", we will contact you to discuss your options. If the problem simply cannot be fixed, we will return your Scopemeter and your payment. No fix, no pay!


Fluke Scopemeter 120 Series LCD Display Repair: $105.00

Fluke Scopemeter LCD repair submit button

Fluke Scopemeter 190 Series LCD Display Repair: $135.00

The service fee includes free Priority Mail shipping back to you plus a 6-month warranty* on the repair. An expedited service and return shipping option is available when placing your order.


Terms and conditions: LCD repair service offered to out-of-warranty Fluke 43 Power Quality Analyzer and Scopemeters 123, 124, 125, 192, 196, 199, 215, and 225 only. To qualify for free Priority Mail shipping, return address must be in the U.S. (including Alaska and Hawaii), and Scopemeter must be sent with no accessories or attachments except the battery pack unless otherwise explicitly requested by Right-Click. Repair covers rebonding of the ACF only; no other issues such as malfunctioning chips, cracked or broken LCD glass, or any other physical damage will be covered or repaired. Failure of Right-Click Computer & Electronics Service to successfully repair the ACF bonding shall release the customer from any service charge or return shipping costs.

*6-month warranty period begins upon customer's receipt of repaired unit and includes one (1) free repair (excluding return shipping) within the 6-month time period.

Notice: Introductory pricing has been discontinued as of February 1, 2010; however, future special pricing may occur.